2024 Frontier Rotary Cutters RC2048

Information

2024 Frontier Rotary Cutters RC2048

Features may include:

Easy-to-maneuver deck

The round-back deck design on the RC20 Series Rotary Cutter enables easy maneuvering into tight corners and around trees, fences, and other hard-to-reach areas.

Deck deflectors offered in chain or rubber

The front deck and deflector support are flush with the deck on the RC20 Series Rotary Cutters. This allows water and debris an unrestricted exit off the top of the deck.

These deflectors are available in:

  • Rubber or chain on the front
  • Metal or chain on the rear
Adjustable cutting height

Adjusting the cutting height is easy. Along with adjusting a tractor's three-point linkage, simply move the support bar to the desired cutting height.

The RC20 Series Rotary Cutters go as low as 3.8 cm (1.5 in.) or as high as 22.9 cm (9 in.).

Balanced blade pan reduces vibrations

There is one standard blade pan for all four sizes of the RC20 Series Rotary Cutters. The blade pan is stamped instead of fabricated and is statically balanced to reduce vibration.

The blade bar is thicker for added durability.

Reversible hitch accommodates many types of tractor hookups

The lower hitching point on the RC20 Series Rotary Cutter accommodates a reversible front hitch for smaller or older tractors.

Photos

Highlights

  • Willmar, Minnesota
  • 2024
  • Frontier
  • Rotary Cutters RC2048
  • Available
  • Blade: 76 mm (3 in.) | Laminated: 95 mm (3.75 in.) | Rubber: 95 mm (3.75 in.)
  • Cutting: 4-23 cm (1.5-9 in.)

Specifications

  • 2024
  • Frontier
  • Rotary Cutters
  • RC2048
  • Rotary Cutters
  • 13-33 kW (18-45 hp) | 540 rpm
  • Category: ASAE 3
  • Gear case: 34 kW (45 hp)
  • Type: Shear bolt or slip clutch
  • Type: Solid rubber or laminated
  • Blades Tip : 66.5 m/s (13,090 fpm)
  • Lift-type | Cat. 1, adaptable to Cat. 2 | iMatch compatible | AutoHitch compatible
  • 11 gauge (3 mm / 0.12)
  • Skirt Thickness: 11 gauge (3 mm / 0.12) | Cutting diameter: 0-2.5 cm (0-1 in.) | Blades Thickness: 13 mm (0.5 in.) | Blade holder Diameter: 567 mm (22.3 in.) | Diameter laminated: 381 mm (15 in.) | Diameter rubber: 381 mm (15 in.)
  • 129 cm (51 in.)
  • 220 cm (87 in.)
  • 122 cm (48 in.)
  • Cutting: 4-23 cm (1.5-9 in.)
  • Cutting chamber: 19 cm (7.5 in.)
  • Blade: 76 mm (3 in.) | Laminated: 95 mm (3.75 in.) | Rubber: 95 mm (3.75 in.)
  • Operating: 232 kg (512 lb)
  • Deck Shape: Flat-open round back | Deck Type: Single | Blades Type: Heat treated, suction | Blade holder type: Round pan-type | Wheels Quantity: 1 | Marking: Standard | Front deflector: Standard | Rear deflector: Standard
  • Time period: 1 year | Gearbox: 1 year