Haug Implement Co.

  • 3593 E Highway 12
  • Willmar, MN 56201
  • Call Us: (320) 235-8115
  • https://www.haugimp.com/
Print This Page

2025 John Deere 1550 TerrainCut™ 72 in 7-Iron™ PRO side discharge

Information

2025 John Deere 1550 TerrainCut™ 72 in 7-Iron™ PRO side discharge

TerrainCut™ Front Mower

7-Iron™ PRO Side Discharge or Fastback™ Rear Discharge Deck

Diesel Engine

Compatible with select front blade, snow blower and broom attachments

Features may include:

  • Diesel engine has high-quality features to minimize operating cost
  • The 1500 Series TerrainCut™ Front Mowers are powered by liquid-cooled, 3-cylinder diesel engines.
  • These engines feature low levels of exhaust and emissions, reduced noise levels, and excellent fuel economy. They also meet the necessary Environmental Protection Agency (EPA) Tier 4 emissions requirements.
  • The 1570, 1575, 1580, and 1585 models are biodiesel compatible from the factory up to B20.
  • Key features of the engine include:
  • Economical cast-in block cylinder design for good cooling and long life
  • Indirect fuel injection (1550)
  • Direct fuel injection (1570, 1575, 1580, 1585)
  • Injects fuel directly on top of pistons for more efficient combustion
  • Delivers more horsepower per gallon of fuel
  • Improves starting
  • Develops more horsepower per gallon of fuel and improves starting
  • Aluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics
  • Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and noise from the piston slap
  • Higher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste gases and increase combustion efficiency
  • Timing gears and injector drive gears utilize helical profile gears to help lower engine noise; gear teeth have a newly designed roll-off profile, giving almost no clash, no noise, and no backlash
  • Fuel filter with replaceable element
  • Full-pressure intake manifold provides quick starts in temperatures down to 0°F (-18°C)
  • Auto-bleed fuel system – there is no need to prime the system if the tractor runs out of fuel; the system self-primes the injection pump, lines, and injectors, providing fast fuel recovery
  • Key start and shutoff eliminates fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned off
  • See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
  • Enclosed engine compartment to keep out debris and lower sound levels
  • Sealed radiator compartment to keep trash and debris on outside of hood
  • Excellent torque for plenty of lugging power when operating in tough mowing conditions
  • Full-pressure lubrication for positive lubrication, even when operating on slopes
  • Dual-element, dry-type, replaceable air cleaner completely sealed for effective cleaning
  • 90 percent to 95 percent of dirt ejected before it reaches the paper element
  • Secondary safety element for additional filtering
  • Progressive-type air restriction indicator to let operator know when the filter needs servicing
  • Automotive-type alternator for plenty of charge to the battery and power for accessories
  • 75 amp for open-station models
  • 95 amp for ComfortCab models
  • Automatic initiation of air heater for easier cold-weather starting
  • Automotive-sensing system tells operator when engine is ready to start
  • Fuel tank features:
  • 16-U.S. gal. (60.6-L) capacity provides a 10-hour run time.
  • Top draw provides clean fuel.

Photos

Highlights

  • Willmar, Minnesota
  • 2025
  • John Deere
  • 1550 TerrainCut™ 72 in 7-Iron™ PRO side discharge
  • Hydrostatic 2WD, optional full time or on demand 4WD
  • Diesel | Pump: Vacuum-operated diaphragm | Delivery system: Carburetor
  • Available
  • Deflector down - 75 in. 191 cm Deflector up for storage - 65 in. 165 cm
  • 44.8 in. 114 cm | Cutting: 1.5-4.5 in. 3.8-11.4 cm 61 in. 155 cm

Specifications

  • 2025
  • John Deere
  • 1550 TerrainCut™
  • 72 in 7-Iron™ PRO side discharge
  • Riding
  • 3TNV80F
  • Gross PS: 25 hp 18.4 kW
  • 3,000 rpm
  • Three
  • 77 cu in. 1.26 L
  • Full pressure
  • Liquid
  • Dual element dry type
  • Electric start
  • Indirect
  • At 1,900 rpm: 47.2 lb-ft 64 Nm
  • Top draw
  • Diesel | Pump: Vacuum-operated diaphragm | Delivery system: Carburetor
  • PTO off, park brake engaged, speed lever in neutral | Drive: V-belt
  • Hydrostatic 2WD, optional full time or on demand 4WD
  • Dynamic braking with hand controls, hand lever to set parking brake | Park brake: Tire engagement | Park brake actuation: Hand lever
  • Front anti-scalp rollers: Single left, double-captured center | Drive wheels: 23x10.5-12
  • Flat free, 11x4-5 | No-flat semi-pneumatic with sealed bearings
  • LH, RH, Center
  • LH, RH, Center
  • 26x12-12 square shoulder 4-ply turf | Load rating: 4 PR
  • 12 V
  • Cold cranking amp: 300 amp | Hour meter: Standard, digital
  • Speed range: 0-12 mph 0-19.3 km/h | Blade tip speed: 18,000 fpm 5,486 m/min
  • Standard
  • Mower deck size: 72 in. 183 cm | Blades Thickness: 0.203 in. 0.516 cm
  • with deck: 83 in. 211 cm
  • Deflector down - 75 in. 191 cm Deflector up for storage - 65 in. 165 cm
  • 44.8 in. 114 cm | Cutting: 1.5-4.5 in. 3.8-11.4 cm 61 in. 155 cm
  • Tank: 16 U.S. gal. 60.6 L
  • 785 lb 356 kg
  • Material 10-gauge, 0.14-in. (3.42-mm) fabricated steel deck top with added 10-gauge, 0.14-in. (3.42-mm) spindle mounting plate, 7-gauge, 0.19-in. (4.8-mm) side skirts with reinforcement bar
  • 24 months