2022 John Deere 9RT Series Scraper Special 9RT 520
Information
2022 John Deere 9RT Series Scraper Special 9RT 520
Engine HP1: 572 Max / 520 hp Rated
e18™ PowerShift Transmission
Choice of three different cab and visibility packages
AirCushion™ Suspension
Features may include:
PowerTech™ 13.6L (827-cu in.) engine: real world usability, not just power on paper
The muscle to handle heavy draft disks and rippers, power-hungry air seeders and planters, and large transport loads like grain carts and slurry wagons. The durable design and heavy-duty components you can depend on when you need to get in and get out. All in a Final Tier 4 (FT4) and Stage V compliant package. You get real-world power with the purpose-built 13.6L (827-cu in.) engines from John Deere Power Systems, standard in the 291 to 440 engine kW (390 to 590 engine hp) 9 Series Tractors.
We developed our newest power plant from a clean sheet of paper, starting with stronger castings, beefier bearings, and more robust internal components, all designed to meet the high demands of field operations. We replaced the fuel injectors with a high-pressure common rail (HPCR) fuel system and eliminated the diesel particulate filter (DPF) to boost to fuel efficiency and lower operation and maintenance costs. Integrated coolant and oil passages, along with a new belt-driven water pump, eliminate potential leak points and allow for a less-crowded engine compartment, improving serviceability and reducing debris accumulation.
In redesigning the engine, we also gave it:
Hydraulic valve lash adjusters to maintain valve-lash settings during engine operation, reduce valve train noise and wear, and allow for greater fuel efficiency.
A hydraulic fan drive for improved cooling capacity with no required maintenance.
A new integrated wiring harness design featuring a modular layout for reduced vibration, greater reliability, and easier service and diagnostics.
A rear gear train that integrates fully into the cast-iron block, reducing tiresome engine noise and improving the durability of the crankshaft damper.
Combination sensors where possible, meaning fewer sensors, connectors, and wires.
A powerful engine brake that allows operators to use the engine to control tractor and implement speeds while transporting or traveling downhill, reducing wear on the drivetrain brake components.
It all adds up to:
14 percent more power and 11 percent more torque
3 percent lower fuel consumption
10 percent lighter
27 percent reduction in mean repair time and an estimated $8,308 savings in service costs over the life of the engine
9 Series Visibility packages let you run with confidence, dawn until dusk
Visibility is more than just lighting. It’s mirrors where you need them, shades for the blinding late-fall and early-spring sun, wipers to help keep all the glass clear, and integrated camera capability. The new 9 Series Tractors let you choose the visibility package that best suits your needs – Select, Premium, or Ultimate with 360-degree light-emitting diode (LED) lighting –so you and your operators can run with all-conditions confidence.
John Deere integrated solutions: a world of connected technology, right from the factory
John Deere makes it easy for you to access an entire suite of connected applications, all designed to help you make the most of every seed, every hour, every gallon, and every bit of machine-related information.
Photos
Highlights
Willmar, Minnesota
2022
John Deere
9RT Series Scraper Special 9RT 520
John Deere e18™ 18-speed PowerShift™ with Efficiency Manager™: 25 mph (40 km/h)
Diesel
Available
Specifications
2022
John Deere
9RT Series Scraper Special
9RT 520
4WD
John Deere
PowerTech™ | wet-sleeve cylinder liners with four valves in-head
827 cu in. (13.6 L)
Rated: 520 hp (382 kW) | Maximum: 572 hp (421 kW) | Power boost: 10 percent
Level: Final Tier 4 (FT4) | After treatment type: Diesel oxidation catalyst (DOC)/selective catalytic reduction (SCR)
Dual series turbocharger with fixed geometry first stage and wastegated second stage; air-to-air aftercooling and cooled exhaust gas recirculation (EGR)
Total cold cranking amps: 3 x 925 CCA / Total: 2775 CCA
Size: 250 amp
Interval for engine oil change: 500 hours | Interval for hydraulic/transmission oil change: 1500 hours | Interval for engine coolant change: 6000 hours
Closed-center, pressure-and-flow compensated | Number of rear selective control valves (SCVs): Four to eight factory or field installed / Base: four 1.3-cm (1/2-in.) couplers | SCV control: Electronic
Available at a single rear SCV 1.9-cm (3/4-in.) couplers: 42 gpm (159 L/min)
Rated output: 110 20,582 gpm (416 L/min)
Tread spacing: Narrow undercarriage: 2032, 2235, or 3048 mm (80, 88, or 120 in.) / Wide undercarriage: 87 in. (2218 mm) | Display Generation 4 4600 CommandCenter™: 10 in. (25.4 cm) | Cab glass area: 71.47 sq ft (6.64 m2) | Drawbar clearance: 19 in. (483 mm) | Rear axle: 4.72 x 120 in. (120 x 3048 mm)
30 in. (762 mm)
116 in. (2947 mm)
With front weights, excluding hitch and coupler: 274.2 in. (6965 mm)
With brakes Group 47 or Group 48 tires: 19.8 ft (6.035 m)
350 U.S. gal. (1324 L) | Diesel exhaust fluid (DEF) tank: 24.8 U.S. gal. (93.9 L)
Rear category (SAE designation): Category 4N: 15,000 lb (6804 kg) / Category 4N: 20,000 lb (9072 kg) | Maximum lift capacity behind lift points: Category 4N/4: 20,000 lb (9072 kg)
Maximum vertical load: 12,000 lb (5440 kg)
Inner cab: 115 cu ft (3.27 m3)
Crankcase volume: 16.9 U.S. gal. (64 L)
14.9 U.S. gal. (56.5 L)
Transmission-hydraulic system: With 3-point hitch and PTO: 79.3 U.S. gal. (300 L)
Base machine: 45,375 lb (20,582 kg) | Maximum ballast level: 54,000 lb (24,494 kg)
Approximate, Open;Cab: 45,375 lb (20,582 kg)
Working: 18 halogen | Type of bulb in headlight (Halogen, Zenon, LED): halogen, 65 W
Sensing type: Electrohydraulic with draft sensing | Midrollers: Four | Radio: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna | Guidance: Integrated AutoTrac™ | Telematic: Available with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination)
Degree of seat swivel, left hand 25 degree (angle) / Degree of seat swivel, right hand 40 degree (angle) / Air suspension