2024 Westfield MKX2 Auger 1063

Information

2024 Westfield MKX2 Auger 1063

Features may include:

Open discharge spout
  • More efficient flow
  • 20% HP reduction
  • New tapered bearing for increased lifespan
Steerable axle
  • Improved maneuverability
Redesigned boot
  • Separate boot flight with removable shafts
  • AR boot flight standard (13” and 16”)
  • Hanger bearing supports boot flight and reduces noise
  • Easier inspections and servicing with dual side boot clean-out doors (13”)
Open Discharge Spout
  • New open discharge spout decreases horsepower requirements
Trussing
  • Aircraft cable trussing
A-Frame
  • Stable A-frame support (53'-83')
Axles
  • Wide standing axles

Photos

Highlights

  • Willmar, Minnesota
  • 2024
  • Westfield
  • MKX2 Auger 1063
  • Available
  • Lowered: 11'-7" (3.5 m) | Halfway: 26'-3" (8 m) | Raised: 41'-6" (12.6 m) | At Liftarms: 16'-5" (5 m) | At Wheels: 19'-2" (5.8 m)

Specifications

  • 2024
  • Westfield
  • MKX2 Auger
  • 1063
  • General
  • Shaft: 14E constant velocity with 5/16" (8 mm) shear bolt
  • Hp Required (With Dry Wheat): 50-60 hp
  • 15" (38.1 cm)
  • Thread: 112" (2.8 m)
  • Lift: Single 4" (10.2 cm) cylinder with 5/16" (0.8 cm) aircraft cable
  • Psi Required To Raise Auger: 1200 psi (82.7 bar)
  • Reach Lowered: 32'-3" (9.8 m) | Reach Halfway: 30'-6" (9.3 m) | Reach Raised: 26'-9" (8.2 m) | Reach Liftarms: 24'-9" (7.5 m) | Reach to Wheels: 29'-4" (8.9 m)
  • Low Profile Hopper Dimensions: 60" (152.4 cm)
  • Low Profile Hopper Dimensions: 40" (101.6 cm)
  • Low Profile Hopper Dimensions: 10" (25.4 cm)
  • 13' 6" (4.1 m)
  • Lowered: 11'-7" (3.5 m) | Halfway: 26'-3" (8 m) | Raised: 41'-6" (12.6 m) | At Liftarms: 16'-5" (5 m) | At Wheels: 19'-2" (5.8 m)
  • Tube Gauge: 12 ga | Tube Connectors: Heavy-duty 3/16" (0.5 cm) angle flange | Main Flighting: 9" (22.9 cm) OD x 7 ga stretched and welded with Wear Edge TechnologyTM on critical points | Wear Edge Technologytm: /4" (0.6 cm) plus 10 ga ribbon weld = 5/16" (0.8 cm) Wear Edge TechnologyTM on critical grain transfer points | Flighting Shaft: High strength 2" (5.1 cm) OD x 11 ga tubing square flight connection | Upper Bearing: 2" (5.1 cm) taper roller bearing assembly | Lower Bearing: 1 1/2" (3.8 cm) pillow block greaseable ball bearing | Tube Trussing: 5/16" (0.8 cm) aircraft type galvanized steel cable | Undercarriage: 3" (7.6 cm) x 11 ga A-frame | Axle: 2 1/2" (6.4 cm) x 2 1/2" (6.4 cm) x 1/8" (0.3 cm) wall square tubing
  • 4-bolt agricultural type
  • Hardened tooth sprocket with #60 chain