2024 Westfield MKX2 Auger 16125

Information

2024 Westfield MKX2 Auger 16125

Features may include:

Open discharge spout
  • More efficient flow
  • 20% HP reduction
  • New tapered bearing for increased lifespan
Steerable axle
  • Improved maneuverability
Redesigned boot
  • Separate boot flight with removable shafts
  • AR boot flight standard (13” and 16”)
  • Hanger bearing supports boot flight and reduces noise
  • Easier inspections and servicing with dual side boot clean-out doors (13”)
Open Discharge Spout
  • New open discharge spout decreases horsepower requirements
Trussing
  • Aircraft cable trussing
A-Frame
  • Stable A-frame support (53'-83')
Axles
  • Wide standing axles

Photos

Highlights

  • Willmar, Minnesota
  • 2024
  • Westfield
  • MKX2 Auger 16125
  • Available
  • Lowered: 14'-3" (4.3 m) | Halfway: 48'-6" (14.8 m) | Raised: 87'-10" (26.8 m) | At Liftarms: 31'-6" (9.6 m) | At Wheels: 37'-1" (11.3 m)

Specifications

  • 2024
  • Westfield
  • MKX2 Auger
  • 16125
  • General
  • Shaft: 50E double CV with 2-bolt shear
  • Hp Required (With Dry Wheat): 195 - 225 hp
  • 22.5" (57.2 cm) agricultural tires
  • Thread: 148" - 182" (375.9 - 462.3 cm)
  • Lift: 2" (5.1cm) x 6 1/2" (16.5 cm) bore cylinders; 1/2" (1.3 cm) aircraft cable
  • Psi Required To Raise Auger: 2000 psi (137.9 bar)
  • Reach Lowered: 68'-8" (20.9 m) | Reach Halfway: 63'-8" (19.4 m) | Reach Raised: 48'-9" (14.9 m) | Reach Liftarms: 44'-4" (13.5 m) | Reach to Wheels: 56'-9" (17.3 m)
  • Low Profile Hopper Dimensions: 68" (172.7 cm)
  • Low Profile Hopper Dimensions: 46 1/2" (121.9 cm)
  • Low Profile Hopper Dimensions: 11" (27.9 cm)
  • 17' 6" (5.3 m)
  • Lowered: 14'-3" (4.3 m) | Halfway: 48'-6" (14.8 m) | Raised: 87'-10" (26.8 m) | At Liftarms: 31'-6" (9.6 m) | At Wheels: 37'-1" (11.3 m)
  • Tube Gauge: 10 ga | Tube Connectors: 1/4" (0.6 cm) angle flange | Main Flighting: 15" (38.1 cm) x 1/4" (0.6 cm) stretched & welded | Wear Edge Technology: 1/4" (0.6 cm) main flighting with Wear Edge TechnologyTM on critical grain transfer points | Ar Boot Flight: 1/4" (0.6 cm) | Flighting Shaft: 3.5" (8.9 cm) x 11 ga tubing; square flight connector | Greaseless Hanger Bearing For Boot: 2 3/8" (6 cm) ID, triple seal | Upper Bearing: 2" (5.1 cm) taper roller bearing assembly | Speed Reducer Gearbox: Enclosed, cast casing, 1000 rpm reducing gearbox (540 rpm) with reversing capability | Tube Trussing: 3.5" (8.9 cm) x 11 ga tubing; 1/2" (1.3 cm) cable stays | Undercarriage: 4" (10.2cm) x 8" (20.3cm) HSS tubing | Axle: 4" (10.2 cm) x 4" (10.2 cm) x 3/16" (0.5cm) tubing; 4" (10.2 cm) x 4" (10.2 cm) x 1/4" (0.6 cm) on extensions
  • 8-bolt agricultural type