2023 John Deere 324G

Used 2023 John Deere 324G Skid Loader, 69 HP, Yanmar Diesel Engine, Cab with A/C, Heater, Defrost, Radio with Bluetooth & Air Ride Seat (Cloth with Heat), ISO Switchable Controls, 2 Speed Transmission, CAMSO 12x16.5 Tires, Power Quick Tach, Standard Hydraulics, 78" Bucket.
MoreLess
Limited Time Offer!

Selling Price -$58,500.00

  • Operators Station:Cab w/ AC
  • Operators Station:ISO Pattern
  • Operators Station:Air Ride Seat
  • Powertrain:2 Speed
  • Tires:Beefy Baby Tires
  • Buckets:78" Bucket
  • 69 HP Yanmar Diesel Engine
  • 2 Speed Transmission
  • Power Quick Tach
  • Heater
  • Defrost
  • Standard Hydraulics
  • 12X16.5 NHS, CAMSO SKS Tires
  • 2023
  • John Deere
  • 324G
  • Base
  • General
  • 4TNV98CT
  • Yanmar
  • Tier 4
  • Turbo
  • 203 Inches³ (3.3 ltr)
  • SAE Net: 70 hp (52.5 kW) | SAE Gross: 74 hp (55 kW) | Hydraulic Power: 41.5 hp (31.009 kW)
  • 2500 rpm
  • Max. Gross: 207 lbf / ft (280 Nm) | Axle Torque - Maximum: 4994 lbf / ft (6771 Nm)
  • Drive Chain Rating: 80 - HD
  • 12 - 16.5 - 12 PR SKS
  • Tipping Load - Foundry: 5380 lbs (2443 kg) | Breakout - Lift Foundry: 5250 lbf (23.3 kN) | Breakout - Bucket Foundry: 8750 lbf (38.9 kN)
  • 6.9 mph (11.1 kph)
  • 3450 PSI (237.87 bar)
  • Output: 21 gallons (US) / min (78 lt/min)
  • Rear Departure Angle: 28 Degrees | Dump Angle: 41 Degrees | Rollback - Ground Level: 34 Degrees
  • No Bucket: 112.3 inches (2850 mm) | With Bucket Foundry: 136.3 inches (3460 mm)
  • No Bucket: 67 inches (1700 mm)
  • 81.1 inches (2060 mm)
  • To Hinge Pin: 126 inches (3200 mm) | Dump Height - Maximum Foundry: 102.1 inches (2590 mm) | Reach - Max Dump Height Foundry: 29.9 inches (760 mm)
  • 9.3 inches (240 mm)
  • 44.2 inches (1120 mm)
  • 21 gallons (US) (79 ltr)
  • Rated Operating Capacity - Foundry: 2690 lbs (1221 kg)
  • Foundry: 7700 lbs (3496 kg)
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $58,500.00
  • WILLMAR
  • Pre-Owned
  • 41371
  • 2023
  • John Deere
  • 324G
  • 1T0324GKVPJ448431
  • 4TNV98CT
  • 220
  • Available
  • No Bucket: 67 inches (1700 mm)
  • To Hinge Pin: 126 inches (3200 mm) | Dump Height - Maximum Foundry: 102.1 inches (2590 mm) | Reach - Max Dump Height Foundry: 29.9 inches (760 mm)
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.