Current John Deere Hay-Forage-Equipment Baling-Equipment Large Square Baler

2025 John Deere Large Square Baler L341R High-Density

2025 John Deere Large Square Baler L341R High-Density

Swipe to View More

  • Year 2025
  • Make John Deere
  • Model Large Square Baler
Shop John Deere Pre-Owned
Product Details Specifications Photos
2025 John Deere Large Square Baler L341R High-Density

2025 John Deere Large Square Baler L341R High-Density

  • Year 2025
  • Manufacturer John Deere
  • Model Name Large Square Baler
  • Trim Name L341R High-Density
  • Generic Type (Primary) Square Baler

2025 John Deere Large Square Baler L341R High-Density

Large Square Baler

Bale Documentation with John Deere Operations Center™

MegaWide™ pickup with MegaTough™ pickup teeth

John Deere moisture sensor and weighing system

BalerAssist™ drivetrain system

Features may include:

MegaWide™ pickup with MegaTough™ pickup teeth provide added durability
  • 2.2-m (7.2-ft) wide pickup is available on the L331R and L341R Baler
  • Available with standard or premium components
  • Tooth-to-tooth width is 1.92 m (76 in.)
Premium MegaWide™ pickup
  • The premium MegaWide pickup is available for the L331 and L341 Large Square Balers. The premium pickup offers larger components to increase the durability and reliability of the pickup.
  • Larger cams and cam bearings
  • Larger spider gears
Knotter trip system
  • The John Deere-designed double-tie knotting system is gear and driveline driven to ensure the needle-to-plunger timing is maintained throughout the life of the baler.
  • The needle lift crank and clutch rocker arm are made of hardened cast iron to improve strength and durability of the knotter clutch. The gearbox drives the system around 360 degrees to complete a tie.

PTO

PTO Power, Rated Engine Speed Minimum tractor requirement: 108 kW (145 PTO hp) - no Pre-Cutter / 119 kW (160 PTO hp) - with Pre-Cutter

Wheels & Tires

Tires, Rear Specification Single axle: 600/50/22.5 or 710/40R/22.5

Dimensions

Dimensions Pickup diameter: 25.6 cm (10 in.) | Tine spacing: 6.6 cm (2.6 in.)
Bale Diameter 90x120 cm (3x4 ft)
Height Bale: 90 cm (35 in.) | Machine: 3 m (9.9 ft)
Bale Length 60 up to 300 cm (24 up to 118 in.)
Length Bale chamber: 305 cm (120 in.) | Cutting: 44 mm (1.7 in.) or 88 mm (3.5 in.) | Machine: 9.29 m (30.6 ft)
Stroke Plunger: 69.5 cm (27 in.)
Width Bale: 120 cm (46.5 in.) | Intake: 220 cm (86 in.) | Machine: 3.35 m (11 ft)

Capacities

Features Twine capacity (rolls): 30

Weights

Weight Machine: 10,755 (23,710 lb)

Features

Features Number of tine bars 4-5: Four | Number of plunger strokes: 45 spm | Density control: Four hydraulic cylinders | Control: ISOBUS - GreenStar™ 2 1800 or GreenStar 3 2630 | Number of knotters: Six | Knife protection: Individual spring
Knife Quantity 21, 11, or 10

Product Photography