2025 John Deere R Series Zero Turn Mowers Z997R Diesel 60 in 7Iron™ PRO
- Year 2025
- Make John Deere
- Model R Series Zero Turn Mowers
2025 John Deere R Series Zero Turn Mowers Z997R Diesel 60 in 7Iron™ PRO
- 37.4 HP (27.5 kW)
- Biodiesel (B20) compatible
- Tier 4 compliant
- 7-Iron™ PRO deck
- Rear Discharge Deck Available
Features may include:
Powerful diesel engine for increased performanceThe Z997R is powered by a 3-cylinder, liquid-cooled diesel engine with a gross 37.4 hp (27.5 kW) that meets U.S. Environmental Protection Agency (EPA) Final Tier 4 emission standards. The engine achieves Final Tier 4 compliance by using a diesel oxidation catalyst with diesel particulate filter (DOC/DPF) system.
The three-cylinder diesel engine features low noise levels, superior fuel economy, and a high torque reserve that provides plenty of power and performance.
Key features of the engine include:
- Economical, cast-in block cylinder design gives good cooling and long life.
- Liquid-cooled design provides more consistent operating temperatures than air-cooled.
- Direct fuel injection is provided.
- Injects fuel directly on top of pistons for more efficient combustion
- Develops more horsepower per gallon of fuel
- Improves starting
- Aluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat-transfer characteristics.
- Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by fuel and noise from the piston slap
- Higher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste and increase combustion efficiency
- Timing gears and injector drive gears utilize helical profile gears to help lower engine noise.
- Gear teeth have a newly designed ''roll-off'' profile, giving almost no clash, no noise, and no backlash
- Fuel filter with replaceable element is provided.
- Full-pressure intake manifold provides quick starts in temperatures down to 0°F (-18°C).
- Auto-bleed fuel system gives extra convenience.
- No need to prime the system if the unit runs out of fuel; the system will self-prime the injection pump, lines and injectors, providing fast fuel recovery
- Key start and shutoff eliminate fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned off.
- See-through coolant recovery tank permits operator to check coolant level without removing radiator cap.
- Sealed radiator compartment keeps trash and debris on outside of hood.
- Dual-element, dry-type air cleaner with safety element and air service indicator is provided.
- Dual-element design for added engine protection
- Easy to service
- Completely sealed for effective cleaning and 90 to 95 percent of dirt ejected before it reaches the paper element
- Secondary safety element for additional filtering
- Air-restriction indicator to let operator know when the filter needs servicing
- Full-pressure lubrication with full-flow filter lengthens engine life.
- Engine wear reduced by ensuring proper lubrication, even when operating on hillsides or uneven terrain
- Oil filter helps keep oil clean for increased engine life
- Automotive-type alternator (75 amp) provides plenty of charge to the battery.
- Rear-mounted, covered radiator and fan keeps noise away from the operator and is easy to service.
- Isolated engine mounting reduces engine vibration at operator's station for more comfortable operation.
Engine
							Engine Manufacturer
							3TNV88C
						
						
							Engine Power
							PS: 27.5 kW (37.4 hp)
						
						
							Rated Engine Speed
							Gross at 3,000 rpm
						
						
							Cylinder Liners
							Three
						
						
							Displacement
							1,642 cc (100.2 cu in)
						
						
							Lubrication
							Full pressure
						
						
							Cooling
							Liquid
						
						
							Air Cleaner
							Pre-cleaner Yes Heavy-duty canister, dry type with safety element and air-restriction indicator
						
						
							Starter
							Operator presence starting system: Brake-N-Go (foot)
						
						Fuel System
							Fuel Type
							Diesel or Biodiesel (up to B20)
						
						
							Fuel System
							Fuel tank switch/shut-off valve
						
						PTO
							PTO Type
							Drive: Internal wet disk clutch
						
						Drivetrain
							Drive System
							Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor | Speed and direction control: Zero turn
						
						
							Transmission
							Hydrostatic
						
						
							Clutch
							Hydraulic clutch
						
						Brakes
							Brake System Type
							Dynamic braking: Dual hand controlled levers | Park brake: Caliper disc brake | Park brake actuation: Hand lever
						
						Wheels & Tires
							Wheels
							Caster wheels: 13x6.5-6 | Caster wheel: 15x6-6 flat free | Drive wheels: 26x12-12 square shoulder 4-ply turf
						
						
							Front Wheel
							LH, RH, Center
						
						
							Rear Wheel
							LH, RH, Center
						
						
							Tires, Rear Specification
							26x12-12 square shoulder 4-ply turf | Load rating: 4PR
						
						Battery
							Battery
							12 V
						
						Electric
							Electrical
							Cold cranking amp: At 18 degrees C, 490 amp | Hour meter: Digital multi-function display
						
						
							Charging System
							75 amp
						
						Operational
							Operating Conditions
							Consumption: 4.2-7.2 L/hr ( 1.1-1.9 U.S. gal./hr )
						
						
							Operating Speed
							Side discharge: Approximately 18,000 fpm | Blade tip speed: Approximately 15,000 fpm | Speed range: 0-18.5 km/h (0-11.5 mph) | Forward: 0-18.5 km/h (0-11.5 mph) | Reverse: 0-8 km/h (0-5 mph)
						
						Hydraulics
							Oil Filter
							Full flow, replaceable, spin-on type | Drivetrain: Spin-on Type
						
						Dimensions
							Cutting Width
							152, 183 cm (60, 72 in)
						
						
							Length
							225 cm (88.6 in (Varies by deck size) | 152-cm (60-in.) side-discharge: 244 cm (96 in)
						
						
							Width
							With chute down: 188, 218 cm (74, 86 in) | Rear discharge: 161.3, 192.5 cm (63.5, 75.8 in)
						
						
							Height
							With ROPs up: 216 cm (85 in) | With ROPS down: 122 cm (48 in) | Of-cut range: Increments: 0.64 cm (0.25 in) 3.8-12.7 cm (1.5-5 in)
						
						
							Dimensions
							Mower deck size: 152-cm (60-in) | Blades Thickness: 0.64 cm (0.25 in)
						
						Capacities
							Hydraulic Capacity
							12.1 L (3.2 U.S. gal.)
						
						
							Fuel Capacity
							Tank: 45.4 L (12 U.S. gal.)
						
						
							Features
							Crankcase: 3.6 L (3.8 U.S. qt)
						
						Weights
							Weight
							889 to 953 kg (1,960 to 2,100 lb)
						
						Features
							Construction Material, Deck
							7-gauge: 4.6-mm (0.179-in) one-piece forged steel
						
						
							Features
							Blade Number: Three | Mower deck: 7Iron™ PRO side-discharge
						
						Warranty
							Warranty
							36 months or 1500 hours, whichever comes first, no hour limitation for the first 24 months.
						
					 
			 
			